 |
 |
||
  
|
|||
|
|||
FRP Pipe and Fittings :Currently available in 1½” through 12” diameters, Z CORE pipe is rated for temperatures to 275° F and for pressures to 150 psig (higher pressure ratings are available on special request). RECOMMENDED
SERVICES The proprietary resin used in Z CORE pipe gives it outstanding resistance to
aggressive solvents such as methylene chloride, acetone, Di-Methyl formamide, and
chloroform; it also extends the boundaries for fiberglass piping in sulfuric acid service.
Z CORE pipe has a synthetic veil reinforced nominal 100-mil liner for 2' through 6' sizes.
It is especially designed for service in severe corrosion applications in the chemical
process industry, and other industrial plants. The exceptional chemical resistance
of Z CORE fiberglass reinforced pipe means a longer service life than
pipe made of traditional materials. Acetaldehyde
(100%, 200° F) Acetone (100%,125° F) Ammonium hydroxide(28%, 175° F) Benzene
(100%,180°F) Butyl acetate (100%,175° F) Butyl cellosolve (100%, 250° F) Calcium
chloride (Saturated, 275° F) Dichloroethylene (100% ,185° F) Ethyl acetate (100%, 150°
F) Fluorobenzene (100%, 180° F) Green liquor (pulp mill) (100%, 225° F) Lithium
hydroxide(Saturated, 225° F) Methylene chloride (100%, 100° F) Naphtha (100%, 275° F)
Phosphoric acid (85%,120° F) Potassium fluoride (30%,150° F) Sodium hydroxide (50%,175°
F) Sulphuric acid (75%, 150° F) Toluene (100%, 185°F)Turpentine (100%,150° F) Water,
Deionized (100%, 275° F) Xylene (100%, 200° F) Zinc Chloride(50%, 250° F)
CENTRICAST RB-1520: Highly corrosion resistant epoxy pipe grade handles hot aggressive chemicals, caustics, solvents, dilute acids, mineral salts, etc. Recommended for operating temperatures to 225 degrees F. Longer spans, strong adhesive joints without machining and low thermal expansion allows the lowest installed cost. Click here for detailed engineering information about RB-1520 pipe and fittings.
CENTRICAST CL-1520 Recommended for many highly corrosive services up to 200 degrees F. Proprietary resins with high strength fabrics provide high stress capabilities and toughness. No pipe end machining required. Fewer supports, better impact resistance and controlled iron pipe sized OD's make this pipe our "Customers' Choice."
CENTRICAST PLUS® CL-2030 Used for over 25 years in the harshest chemical services of hot acids and chlorine, among others. This high strength vinyl ester grade has an 80 mil pure resin corrosion barrier and 20 mil exterior UV protection, providing the best impact and abrasion resistance.
F-CHEM® and F-CHEM AR* FIBERCAST's filament wound construction offers more flexibility
in resin systems, glass-filled corrosion barriers and wall thickness than centrifugally
cast pipe. This allows for more design flexibility in less severe applications.
|
|||
Visit the Smith Fibercast Homepage
|
|||
